Water problems
< /tr> < td>Adjust the pH value, perform a shock treatment and add KlarPool. < /tr>| The water är green and cloudy | |
| Reason | Algae will appear in the water if there is too little chlorine or if the pH value is too low. |
| Solution | Adjust the pH value, perform a shock chlorine treatment and add KlarPool. |
| The sides of the pool are slimy | |
| Cause | Algae appears in the water if there is little chlorine or if The pH value is above. |
| Solution | |
| The water is slimy and cloudy | |
| Reason 1 | The water already has a high pH value. hard (basic). Lime particles stand out in the water. |
| Solution 1 | Adjust pH value and carry out a shock treatment. Add flocculant and let pump run. |
| Reason 2 | There is not enough disinfectant in the water. |
| Solution 2 | Adjust the pH value, carry out a shock treatment. Add flocculant and let the pump run. Öka, dosage of chlorine. |
| The water is green but clear , brown particles can be seen in the water | |
| Cause< /td> | There are traces of iron in the water (yellow-gray color) or traces of copper (turquoise color). |
| Solution | Adjust pH value and carry out shock treatment, add flocculant and fresh water. Let the pump run continuously. |
| The water is brown and cloudy | |
| Reason | The water contains iron. |
| Solution | Adjust pH value and perform shock treatment, add flocculant and fresh water. Let the pump run continuously. |
| The water is black and cloudy | |
| Reason | The water contains manganese. |
| Solution | Adjust pH value and perform shock treatment, add flocculant and fresh water . Let the pump run continuously. |
| Pool pages have a strict layout | |
| Reason | Ph value for is high and creates lime deposits. |
| Solution | Tö ;m the pool and remove the deposits with a lime remover. |
Relevant mätvä rden
| pH value | 7.0 - 7.4 (adjusted to 7.2) |
| Free chlorine* | 1.0 - 3.0 mg/l |
| Bond claw* | Max. 0.5 mg/l |
| Active oxygen | 3.0 - 8.0 mg/l |
| Cyanuric acid | 25 - 50 mg/l |
| Total Alkalinity | 80 - 120 mg/l |
| Calcium hardness | 100 - 200 mg/l |
*) Chlorine remains in the water after the disinfection effect has worn off . This is called ”Bound claw”. When talking about the value of ”Free chlorine”, is the amount of effective chlorine in the water. Read more about chlorine and active oxygen here.